NEC Univerge SV8100 Features And Specifications Manual page 856

Issue 12.0
Program
Program Name
Number
84-19-36 SIP Extension IP CODEC
Information Basic Setup – G.722
Jitter Buffer (Average)
84-19-37 SIP Extension IP CODEC
Information Basic Setup – G.722
Jitter Buffer (Max)
84-19-38 SIP Extension IP CODEC
Information Basic Setup –
Number of G.726 Audio Frames
84-19-39 SIP Extension IP CODEC
Information Basic Setup – G.726
Voice Activity Detection Mode
84-19-40 SIP Extension IP CODEC
Information Basic Setup – G.726
Jitter Buffer (min)
84-19-41 SIP Extension IP CODEC
Information Basic Setup – G.726
Jitter Buffer (Average)
84-19-42 SIP Extension IP CODEC
Information Basic Setup – G.726
Jitter Buffer (Max)
84-19-49 SIP Extension IP CODEC
Information Basic Setup – RTP
Filter
84-19-50 SIP Extension IP CODEC
Information Basic Setup – FAX
Relay Mode
84-19-51 SIP Extension IP CODEC
Information Basic Setup – T.38
Protocol Mode
84-19-52 SIP Extension IP CODEC
Information Basic Setup – FAX
Maximum Rate
84-19-53 SIP Extension IP CODEC
Information Basic Setup – FAX
Playout FIFO Nominal Delay
2 - 826
Description/Comments
Define the average setting for the
G.722 Jitter Buffer.
Define the maximum setting for
the G.722 Jitter Buffer.
Define the number of G.726 Audio
Frames.
Enable/Disable the G.726 Voice
Activity Detection mode.
Define the minimum setting for the
G.726 Jitter Buffer.
Define the average setting for the
G.726 Jitter Buffer.
Define the maximum setting for
the G.726 Jitter Buffer.
To avoid incorrect voice pass
connection, this Program checks
the sending side address from
received RTP packet at VoIPDB.
Enable/Disable the FAX relay
mode.
Sets the T.38 protocol mode.
Sets the maximum FAX rate.
Sets the FAX playout FIFO
nominal delay.
UNIVERGE SV8100
Assigned Data
1
0~160ms
(default = 60)
0~160ms
(default = 120)
1~4
1 = 10ms
2 = 20ms
3 = 30ms
4 = 40ms
(default = 3)
0 = Disable
1 = Enable
(default = 0)
0~160ms
(default = 30)
0~160ms
(default = 60)
0~160ms
(default = 120)
0 = Disable
1 = Enable

(default = 0)
0 = Disable

1 = Enable
(default = 0)
0 = RTP

1 = UDPTL
(default = 1)
0 = V.27ter, 2400bps
1 = V.27ter, 4800bps
2 = V.29, 7200bps
3 = V.29, 9600bps
4 = V.17, 12000bps
5 = V.17, 14400bps
(default = 5)
0~600ms
(default = 300)
IP Single Line Telephone (SIP)
Level
2 3








