Fip-1.P3 Solid Black - Dell 2130cn Service Manual

FIP-1.P3 Solid black

Before commencing troubleshooting, check the paper transfer path. Make sure there is no foreign
materials on the transfer path, such as staples, paper clips, scraps of paper and so on.
Step
Checking the solid black.
1 Print the contamination check page.
Is the image printed correctly?
Checking the Toner Type
2
Is the Dell Toner seated?
Checking the printing
3 Is the image printed correctly?
Checked by [Test Print] - [Test Pattern 600] in diagnosis.
Checking the test printing
Is the image printed correctly?
4
Checked by printing the [TestPat (IOT)] in [Test Print] in [IOT
Diag] of diagnosis.
Checking the Grid2.
Print the Grid2 page.
5
Is the solid color printed?
Checked by [Test Print] - [Grid2] in diagnosis.
Checking after reseating the PWBA MCU
6 Reseat the PWBA MCU.
Is the image printed correctly?
Checking after reseating the PWBA ESS
7 Reseat the PWBA ESS.
Is the image printed correctly?
Checking after reseating the PWBA HVPS
8 Reseat the PWBA HVPS.
Is the image printed correctly?
9 Is the image printed correctly?
Trouble substance
The entire paper is printed jet-black.
ESS and possible causative parts
- ROS ASSY (PL4.1.1)
- PWBA HVPS (PL4.1.19)
- PHD ASSY (PL4.1.21)
- PWBA ESS (PL8.1.7)
- PWBA MCU (PL8.2.13)
Check
1 - 326
Chapter 1 Troubleshooting
Remedy
Yes
Printing data is
incorrect, then
check the printing
Go to step 2.
data which the
problem
generated.
Change the Toner
Go to step 3. Type setting to
Non-Dell Toner.
Go to step 4. Go to step 5.
Replace the
PWBA ESS.
(Refer to Removal Go to step 5.
42/ Replacement
12.)
Replace the toner
cartridge of the
Go to step 6.
color by which
Solid was printed.
End of work. Go to step 7.
End of work. Go to step 8.
End of work. Go to step 9.
End of work. Go to step 10.
No