Chapter 3 Removal and Replacement Procedures (RRPs)
5) Secure the DRIVE ASSY SUB to the
FRAME ASSY LVPS with the one screw
(silver, M4, 6mm).
6) Secure the FRAME ASSY LVPS to the
printer with the two screws (silver, M4,
6mm) and the six screws (silver, tap,
7) Mate the hooks of the GUIDE
HARNESS FSR with the holes of the
FRAME ASSY LVPS, move the GUIDE
HARNESS FSR to secure it.
3 - 156