Dell 2130cn Service Manual page 429

Hide thumbs Also See for 2130cn:
Table of Contents

Advertisement

Clutch and Solenoid name
(Diag. Code)
CASSETTE1 FEED SOLE-
NOID (Half / Full Rotation)
(DO-b ,c)
DUPLEX EXIT MOTOR (DO-
d,e,f,10)
1)
Turn on the power and enter the Diagnostic Mode.
2)
Remove the CASSETTE1 paper cassette.
3)
Execute the DO-b.
4)
Check the Feed Roll rotation.
5)
Press the "Cancel" key to stop the test.
6)
Replace the paper cassette.
The rotational speed of the motor is as follows.
DO-10<DO-f<DO-e<DO-d
1)
Turn on the power and enter the Diagnosis Mode.
2)
Execute the DO-d.
3)
Check the Exit Roll rotation.
4)
Press the "Cancel" key to stop the test.
2 - 23
Confirmation procedure
Feed Roll
Exit Roll
Chapter 2 Operation of Diag.
Rio02014KA
Rio02053KA

Advertisement

Table of Contents
loading

Table of Contents