Flows 107 Control Panel Freezes - Dell 2130cn Service Manual

Hide thumbs Also See for 2130cn:
Table of Contents

Advertisement

Flows 107 Control Panel Freezes

Checking the operating environment.
Is the printer connected to the Network?
Yes
Checking the IP address.
Can you change the IP address?
Yes
Changing the IP address.
Contact your system administrator for
obtaining a new IP address.
Refer to Reference_1 for details of how
to change the IP address.
Does the error persist when the power
is turned off and on?
Yes
Replace the PWBA ESS. (Removal 42/
Replacement 12)
No
Replace the Printer.
No
Checking the internet connectivity.
Is there any internet connection
available for your PC?
Yes
Updating the firmware to the latest
version.
Download the latest version of the
firmware from the DELL Support
Website, and execute the update.
NOTE: Before updating the firmware to
the latest version, reset the error
following the steps of procedure
described below. In addition,
update the firmware by way of a
USB storage.
1) Remove the network cable.
2) Connect the USB cable.
3) Turn the power off and on.
Does the error persist when the power
is turned off and on?
Yes
Replace the PWBA
ESS. (Removal 42/
Replacement 12)
No
END
1 - 166
Chapter 1 Troubleshooting
No
Replace the PWBA
ESS. (Removal 42/
Replacement 12)
No
END

Advertisement

Table of Contents
loading

Table of Contents