Chapter 3 Removal and Replacement Procedures (RRPs)
12) Shift the BRACKET SNS to frontward,
release the five tabs of the BRACKET
SNS from the printer. Remove the
BRACKET SNS.
13) Release the left shaft of the
ACTUATOR SSI (PL3.2.14) from the hook
of the CHUTE UP (PL3.2.26).
14) Remove the ACTUATOR SSI and the
SPRING ACT SSI (PL3.2.15) by releasing
the right shaft of the ACTUATOR SSI from
the hole of the CHUTE UP.
3 - 45