Dell 2130cn Service Manual page 520

Hide thumbs Also See for 2130cn:
Table of Contents

Advertisement

Chapter 3 Removal and Replacement Procedures (RRPs)
Removal 32 KIT DRIVE ASSY MAIN (PL7.1.98)
1) Remove the Tray 1. (Removal 1)
2) Open the COVER ASSY FRONT (PL1.2.1).
Note: Cover the drum of the PHD unit to avoid exposure to light.
3) Remove the PHD Unit. (Removal 4)
Note: The FUSER part is very hot. Take added care not to get burned when performing the
service operation.
4) Remove the KIT FUSER ASSY. (Removal 5)
5) Remove the COVER ASSY TOP. (Removal 10)
6) Remove the COVER ASSY WINDOW TNR. (Removal 8)
7) Remove the COVER SIDE R. (Removal 13)
8) Remove the COVER SIDE L. (Removal 17)
9) Remove the COVER REAR. (Removal 29)
10) Remove the CLUTCH ASSY DRV and BEARING REGI. (Removal 30)
11) Remove the KIT DRIVE ASSY PH. (Removal 31)
12) Rotate the STOPPER PIVOT
(PL6.1.3), mate the tabs of the STOPPER
PIVOT with the notches of the DRIVE
ASSY MAIN (PL7.1.2).
13) Remove the STOPPER PIVOT from
the printer.
3 - 69

Advertisement

Table of Contents
loading

Table of Contents