Chapter 3 Removal and Replacement Procedures (RRPs)
6) Engage the connector (P/J220) of the
CONSOLE ASSY PANEL.
Note: When carrying out the work this
procedure, route the HARNESS ASSY
PNL A so that the core on the HARNESS
ASSY PNL A fits into the housing space
located on the COVER ASSY FRONT.
7) Attach the COVER CONNECTOR to the
COVER ASSY FRONT.
8) Secure the two hooks of the COVER
CONNECTOR to the COVER ASSY
Go to the next replacement step:
Replacement 29 COVER ASSY FRONT (PL1.2.1)
3 - 209