Flows 17 010-377 Restart Printer
Checking the error
Does the error still occur when the
power is turned off and on?
Yes
Checking after reseating the FUSER
ASSY
Reseat the FUSER ASSY.
Warning: Start the operation after the
FUSER ASSY has cooled down.
Does the error still occur when the
power is turned off and on?
Yes
Checking after replacing the FUSER
ASSY
Replace the FUSER ASSY.
Warning: Start the operation after the
FUSER ASSY has cooled down.
After replacement, be sure to clear the
life counter value. (Refer to the Tech
Sheet).
Does the error still occur when the
power is turned off and on?
Yes
Replace the LVPS. (Refer to Removal
11/Replacement 43) and the PWBA
MCU (Refer to Removal 43 /
Replacement 11).
No
No
No
1 - 52
Chapter 1 Troubleshooting
END
END
END