Chapter 3 Removal and Replacement Procedures (RRPs)
Replacement 21 DRIVE ASSY SUB (PL7.1.1)
1) Attach the DRIVE ASSY SUB to the
Note: Since two types of screws are used for securing the DRIVE ASSY SUB, ensure that the
right screws are used at their right securing positions.
The securing positions for tap screws are marked with [T].
The securing positions for metal screws are marked with [M].
2) Secure the DRIVE ASSY SUB to the
printer with the one screw (silver, M4,
6mm) and the four screws (silver, tap,
3 - 190