Flows 97 Paper Damage - Dell 2130cn Service Manual

Hide thumbs Also See for 2130cn:
Table of Contents

Advertisement

Flows 97 Paper damage

Mnt01117KA
Checking the printer environment
Check that the printer is in a room
where air conditioner is operating. If the
air conditioner is not operating, turn it
on or move the printer to a room with an
air conditioner.
Are printouts still wrinkled or damaged
after turning on the air conditioner?
Check that new dry recommended
paper which matches printer
specifications is being used and replace
as necessary.
Is the printout still wrinkled or
damaged?
Checking the front cover latch and
check the PHD ASSY and FUSER
ASSY installation
After opening and closing the front
cover, reseat the PHD ASSY and the
FUSER ASSY.
Warning: Do work only after the FUSER
unit has cooled to room temperature.
After reseating, is the printout still
wrinkled or damaged?
Checking the paper feeding tray
Is the damaged paper fed from the
SSF?
Is the SSF feeding the envelope?
The envelope was inserted with
the flap closed, air vacuumed,
and shot edge facing toward the
printer.
Tray is recommended for paper feeding because
sheets fed via SSF is prone to skew depending on
how the sheet is placed on SSF.
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
Use the Tray
Feeder.
END
END
END
Tray 1 and paper check
Remove CASSETTE ASSY 250 from
the printer and reinsert the paper.
Check that the side and end guides are
adjusted correctly in the CASSETTE
ASSY 250. If incorrect, readjust as
necessary.
Insert the CASSETTE ASSY 250 into
the printer.
Is the printout still wrinkled or
damaged?
1 - 153
Chapter 1 Troubleshooting
No
Yes
END
A

Advertisement

Table of Contents
loading

Table of Contents