Replacement 10 DISPENSER ASSY (PL5.1.1)
Accesses Position (All the numbers show the procedure number.)
1) Insert the AUGER part of the
DISPENSER ASSY into the hole of the
printer, mate the hole of the DISPENSER
ASSY with the boss of the printer, and then
attach the DISPENSER ASSY.
2) Secure the rear side of DISPENSER
ASSY to the printer with the one screw
(silver, M4, 6mm).
14)
5)
4)
3 - 159
Chapter 3 Removal and Replacement Procedures (RRPs)
9), 10)
11)
12)
13)