Fip-1. 80 Insert Printcart 093-971 - Dell 2130cn Service Manual

Hide thumbs Also See for 2130cn:
Table of Contents

Advertisement

FIP-1. 80 Insert PrintCart 093-971

Step
Possible causative parts:
TONER CARTRIDGE (M) (PL5.1.23)
PWBA MCU (PL8.2.13)
Does the error still occur when the power is turned OFF and
1
ON?
Checking the Toner Type
2
Is the Dell Toner seated?
Checking after reseating the TONER CARTRIDGE (M)
Reseat the TONER CARTRIDGE (M), and check that the
3
lock key is in the lock position.
Does the error still occur when the power is turned OFF and
ON?
Checking after replacing the TONER CARTRIDGE (M)
Replace the TONER CARTRIDGE (M). (Refer to Removal
4
6/Replacement 48.)
Does the error still occur when the power is turned OFF and
ON?
Checking the HARN ASSY TONER CRUM for continuity
Disconnect J31 from the PWBA MCU.
5
Disconnect J312 (M) from the connector CRUM.
Is each cable of J31 <=> J312 continuous?
Checking after reseating the PWBA MCU
Reseat the PWBA MCU. (Refer to Removal 43/
6
Replacement 11.)
Does the error still occur when the power is turned OFF and
ON?
Check
1 - 298
Chapter 1 Troubleshooting
Remedy
Yes
Go to step 2.
End of work.
Change the Toner
Go to step 3.
Type setting to
Non-Dell Toner.
Go to step 4.
End of work.
Go to step 5.
End of work.
Replace the
Go to step 6.
HARN ASSY
TONER CRUM
Replace the
PWBA MCU.
(Refer to Removal
End of work.
43/Replacement
11.)
No

Advertisement

Table of Contents
loading

Table of Contents