Dell 2130cn Service Manual page 522

Hide thumbs Also See for 2130cn:
Table of Contents

Advertisement

Chapter 3 Removal and Replacement Procedures (RRPs)
Removal 33 DRIVE ASSY SUB (PL7.1.1)
1) Remove the Tray 1. (Removal 1)
2) Open the COVER ASSY FRONT (PL1.2.1).
Note: Cover the drum of the PHD unit to avoid exposure to light.
3) Remove the PHD Unit. (Removal 4)
Note: The FUSER part is very hot. Take added care not to get burned when performing the
service operation.
4) Remove the KIT FUSER ASSY. (Removal 5)
5) Remove the COVER ASSY TOP. (Removal 10)
6) Remove the COVER ASSY WINDOW TNR. (Removal 8)
7) Remove the COVER SIDE R. (Removal 13)
8) Remove the COVER SIDE L. (Removal 17)
9) Remove the COVER REAR. (Removal 29)
10) Remove the CLUTCH ASSY DRV and BEARING REGI. (Removal 30)
11) Remove the KIT DRIVE ASSY PH. (Removal 31)
12) Remove the KIT DRIVE ASSY MAIN. (Removal 32)
Note: When performing the step described below, it is not necessary to disengage the
connector of the HARN ASSY INTERLOCK.
13) Remove the HARN ASSY INTERLOCK. (Removal 18)
14) Disengage the connector (P/J221) of
the DRIVE ASSY SUB (PL7.1.1).
3 - 71

Advertisement

Table of Contents
loading

Table of Contents