Dell 2130cn Service Manual page 107

A
Checking the paper feed
Open the Front Cover.
Is the paper fed from the Regi Rollers?
Yes
Checking the SENSOR PHOTO (REGI
SENSOR) for operation
Does the number on the screen
increase by one, every time the actuator
of the SENSOR PHOTO (REGI
SENSOR) is operated?
Checked by [Digital Input] - [DI-2] in
[IOT Diagnosis] of diagnosis.
Yes
END. If the error occurred again,
replace to known good paper.
No
Checking the Regi Clutch for operation
Does the Regi Clutch (CLUTCH ASSY
DRIVE) operate properly?
- PC Operation :
Checked by the [REGI CLUTCH
Operation Check] of the [Machine Check]
of [Diagnosis] tab in the [Tool Box].
- Panel Operation :
Checked by [Digital Output]-[DO-29] of
[IOT Diag] in [Printer Diag] of diagnosis.
During this check, close the COVER ASSY
FRONT.
Checking the Main Motor for operation
Does the Main Motor (DRIVE ASSY MAIN)
operate properly?
- PC Operation :
Checked by the [Main Motor Operation
Check] of the [Machine Check] of [Diagnosis]
tab in the [Tool Box].
- Panel Operation :
Checked by [Digital Output]-[DO-0] of [IOT
Diag] in [Printer Diag] of diagnosis.
During this check, close the COVER ASSY
FRONT.
Remove the CASSETTE ASSY 250.
Check that the foreign substances are
not on the paper path.
No
Replace the Printer.
1 - 81
Chapter 1 Troubleshooting
Yes
Yes
No
Replace the KIT
FEED ROLL/SOL/
CLUTCH. (Removal
35/Replacement 19)
No
Replace the DRIVE
ASSY MAIN.
(Removal 32/
Replacement 22)