3. ERROR CODE FIP
3.1 Troubleshooting for the call center
Flows 1 001-360 Restart Printer
Checking the error
Does the error still occur when the
power is turned off and on?
Checking the FAN for rotation
Does the FAN function normally?
Checked by [Digital Output] - [DO-
1E(HIGH) or DO-1F(LOW)] in [IOT
Diag] of diagnosis.
During this check, close the COVER
ASSY FRONT.
END. If the error occurred again,
replace the Printer.
No
Yes
No
Yes
END
Checking the FAN installation
Reseat the FAN. (Refer to Removal 40/
Replacement 14.)
Does the error still occur when the
power is turned off and on?
Yes
Checking after replacing the FAN
Replace the FAN. (Refer to Removal
40/ Replacement 14.)
Does the error still occur when the
power is turned off and on?
Yes
Checking after replacing the PWBA
LVPS
Replace the PWBA LVPS. (Refer to
Removal 11/ Replacement 43.)
Does the error still occur when the
power is turned off and on?
Yes
Replace the Printer.
1 - 32
Chapter 1 Troubleshooting
No
END
No
END
No
END