Fip-Dc - Dell 2130cn Service Manual

FIP-DC

Step
Checking the connector of the PWBA LVPS for connection
Disconnect the power cord and wait for one minute.
1
Reconnect the all connectors of the PWBA LVPS.
Does the printer operate normally?
Checking the connector of the CONSOLE ASSY PANEL for
connection
2 Reconnect the connector (P/J220) of the CONSOLE ASSY
PANEL.
Does the CONSOLE ASSY PANEL operate normally?
Checking after reseating the PWBA MCU
3 Reseat the PWBA MCU.
Does the printer operate normally?
Check
1 - 376
Chapter 1 Troubleshooting
Remedy
Yes
End of work. Go to step 2.
End of work. Go to step 3.
Replace the
PWBA LVPS.
End of work. (Refer to Removal
11/ Replacement
43.)
No