Chapter 3 Removal and Replacement Procedures (RRPs)
8) Mate the two holes of the BRACKET
MCU R with the bosses of the printer,
secure it with the two screws (silver, 6mm).
9) Insert the tab on the under side of the
GUIDE HARNESS AC into the hole of the
printer, attach the GUIDE HARNESS AC to
the printer.
10) Secure the hook of the GUIDE
HARNESS AC to the printer, engage the
connector (P/J48) of the HARN ASSY SW
POWER to the PWBA LVPS.
3 - 152