Dell 2130cn Service Manual page 421

Sensor name (Diag. Code)
CASSETTE 2 Paper Path
Sensor(DI-a)
NOTE: These procedures are for the technical staff.
1) Remove the COVER CHUTE (PL12.1.5).
2) Turn on the power and enter the Diagnostic Mode.
3) Execute the DI-a.
4) Remove the CASSETTE 1 paper cassette and CASSETTE 2
paper cassette.
5) Check the sensor.
Operator Panel
6) Press the "Cancel" key to stop the test.
7) Replace the CASSETTE 1 paper cassette and CASSETTE 2
paper cassette.
8) Turn off the power.
9) Replace the COVER CHUTE (PL12.1.5).
2 - 15
Chapter 2 Operation of Diag.
Confirmation procedures
Actuator
Normal
Rio02051KA