Hide thumbs Also See for 2130cn:
Table of Contents

Advertisement

Flows 19 016-300/016-301/016-302/016-313/016-315/016-317/016-323/016-327/

016-344/016-345/016-346/016-347 Restart Printer
Checking the error code.
Error code is 016-317?
Yes
Download the latest version of the
firmware from the Dell support website,
and update the firmware with "F/W
Download DL Mode". (Refer to
Refernce_1.)
Does the error still occur when the
power is turned off and on?
Yes
Replace the PWBA ESS. (Removal 42/
Replacement 12.)
Reference_1:
1. Make sure that the printer is connected to the computer via USB port (remove the network cable).
Then, try downloading as follows:
1) Power on the printer while pressing the <X Cancel> and < > buttons.
2) The printer goes into the Download Mode with a message "Download Mode Ready". Then,
activate firmware update tool and follow the instruction displayed.
While the firmware download is being executed, the printer displays a message
"Writing...USB F/W" and the computer displays a progress bar and may be
restarted during the downloading process. Never power off the printer or the
computer until the downloading process completes, and never interrupt the
downloading process.
No
Check whether the version of the
firmware is the latest, referring to the
Printer Information via the Tool Box.
Checked by [Printer Information] of the
[Printer Settings Report] tab in Tool
Box.
For the latest version information, refer
to the Dell Support Web Site.
Is the firmware the latest version?
Yes
Replace the PWBA ESS. (Removal 42/
Replacement 12.)
No
END
1 - 54
Chapter 1 Troubleshooting
No
Download the latest
version of the firmware
from the Dell Support
Web Site.

Advertisement

Table of Contents
loading

Table of Contents