Chapter 3 Removal and Replacement Procedures (RRPs)
12) Disengage the connector (P/J211) of
the DRIVE ASSY MAIN (PL7.1.2), release
all the harness from the hooks of the
DRIVE ASSY PH.
13) Remove the one screw (silver, M4,
6mm), the one screw (silver, M3, 6mm)
and the one screw (silver, tap, 8mm) that
fix the DRIVE ASSY PH to the printer.
Note: When carrying out the work
described next procedure, take care not
to drop the coupling gear to inside.
3 - 67