Dell 2130cn Service Manual page 562

Removal 46 UPPER UNIT (Reference only)
1) Remove the Tray 1. (Removal 1)
2) Open the COVER ASSY FRONT (PL1.2.1).
Note: Cover the drum of the PHD unit to avoid exposure to light.
3) Remove the PHD Unit. (Removal 4)
Note: The FUSER part is very hot. Take added care not to get burned when performing the
service operation.
4) Remove the KIT FUSER ASSY. (Removal 5)
5) Remove the Toner Cartridge (K), (C), (M), (Y). (Removal 6)
6) Remove the COVER ASSY TOP. (Removal 10)
7) Remove the COVER ASSY WINDOW TNR. (Removal 8)
8) Remove the COVER SIDE R. (Removal 13)
9) Remove the COVER SIDE L. (Removal 17)
10) Remove the COVER REAR. (Removal 29)
11) Remove the BREAKER GFI. (Removal 36)
12) Remove the FAN. (Removal 40)
13) Remove the KIT PWBA ESS. (Removal 42)
14) Remove the KIT PWBA MCU. (Removal 43)
15) Remove the CLUTCH ASSY DRV and BEARING REGI. (Removal 30)
16) Remove the KIT TRANSFER ASSY. (Removal 21)
Accesses Position (All the numbers show the procedure number.)
21), 22)
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 111
19), 20)
17), 18)