4.4 Installation Set
Specifies whether or not Alarm display of Toner residual quantity is performed.
4.4.1 Executing Installation Set
1)
Turn off the power.
2)
Turn on the power while holding down "
3)
Release the fingers from these keys when "Diagnosing..." is displayed.
4)
The "Customer Mode" and "IOT Diag" are displayed. (Entered the Diag. mode.)
5)
Press "
" to select "Installation Set", and then press "
6)
Press "
" key to select the ON or OFF.
7)
Press "
" key to execute the setting.
To exit the test or to return to one step higher menu, press the "CANCEL" key.
" and "
" keys.
" key.
2 - 34
Chapter 2 Operation of Diag.