Chapter 3 Removal and Replacement Procedures (RRPs)
Replacement 36 HARN ASSY INTERLOCK (PL8.2.5)
1) Mate the hole of the switch with the boss
of the printer, secure the switch with the
one screw (silver, tap, 16mm).
2) Secure the harness of the HARN ASSY
INTERLOCK with the clamps.
3) Route the harness of the HARN ASSY
INTERLOCK along the GUIDE HARNESS
FSR, engage the connector (P/J44) of the
HARN ASSY INTERLOCK to the PWBA
LVPS.
Go to the next replacement step:
Replacement 37 COVER SIDE L (PL1.1.19)
3 - 228