Flows 19-1 016-340 Restart Printer - Dell 2130cn Service Manual

Flows 19-1 016-340 Restart Printer

Checking the operating environment.
Is the printer connected to the Network?
Yes
Checking the IP address.
Can you change the IP address?
Yes
Changing the IP address.
Contact your system administrator for
obtaining a new IP address.
Refer to Reference_1 for details of how
to change the IP address.
Does the error persist when the power
is turned off and on?
Yes
Replace the PWBA ESS. (Removal 42/
Replacement 12)
Reference_1:Changing the IP address
1) Remove the network cable, and power off the printer and then on
2) Change the IP address on the Control Panel.
3) Plug the network cable back into the printer, and then turn the power on.
4) On the Control Panel, open [Admin] > [Network] > [TCP/IP], and confirm that the IP
No
No
No
address has been changed.
Replace the Printer.
Checking the internet connectivity.
Is there any internet connection
available for your PC?
Yes
Download the latest version of the
firmware from the Dell support website,
and update the firmware with "F/W
Download DL Mode". (Refer to
Refernce_2.)
Yes
Replace the PWBA
ESS. (Removal 42/
Replacement 12)
END
1 - 55
Chapter 1 Troubleshooting
No
Replace the PWBA
ESS. (Removal 42/
Replacement 12)
No
END