Dell 2130cn Service Manual page 434

Hide thumbs Also See for 2130cn:
Table of Contents

Advertisement

Clutch and Solenoid name
(Diag. Code)
CASSETTE1 FEED SOLE-
NOID (Auto OFF)
(DO-2f)
NOTE: This test should be carried out in the case where the Feed Roll
fails to rotate under the CASSETTE1 FEED SOLENOID (DO-b or DO-
c) (Feed Roll Rotation) status.
These procedures are for the technical staff. When performing opera-
tion for five minutes or longer with the front cover open, remove the
PHD ASSY, and cover the drum to avoid exposure to light.
1)
Remove the COVER ASSY SIDE L.
2)
Cheat the safety Interlock System.
3)
Turn on the power and enter the Diagnostic Mode.
4)
Execute the DO-2f.
5)
Check the FEED SOLENOID movement.
6)
Press the "Cancel" key to stop the test.
7)
Turn off the printer power.
8)
Attach the COVER ASSY SIDE L.
9)
Remove the cheter and close the Front Cover.
10) Turn on the printer power.
2 - 28
Chapter 2 Operation of Diag.
Confirmation procedure
Cassette1 Feed Solenoid
Rio02018KA

Advertisement

Table of Contents
loading

Table of Contents