Chapter 3 Removal and Replacement Procedures (RRPs)
2) Mate the holes of the SPRING ROSs
with the bosses of the printer, secure it
with the four screws (silver, tap, 8mm).
3) Engage the two connectors (P/J411,
412) of the ROS ASSY.
4) Mate the three holes of the FRAME
ASSY LVPS with the bosses of the printer,
attach the FRAME ASSY LVPS to the
printer together with the PWB ASSY FAN.
Note: Since two types of screws are used for securing the FRAME ASSY LVPS, ensure that the
right screws are used at their right securing positions.
The securing positions for tap screws are marked with [T].
The securing positions for metal screws are marked with [M].
3 - 155