Chapter 3 Removal and Replacement Procedures (RRPs)
Replacement 5 SENSOR PHOTO: REGI (PL3.2.13)
1) Engage the connector (P/J232) of the
SENSOR PHOTO: REGI.
2) Replace the SENSOR PHOTO: REGI to
the FEEDER ASSY V by mating the three
hooks of the SENSOR PHOTO: REGI.
Note: When carrying out the work this
procedure, it is easier to push the
ACTUATOR REGI IN (PL3.2.11) to
downward.
3) Close the ACTUATOR REGI OUT by
inserting the boss of the ACTUATOR REGI
OUT into the SPRING REGI OUT.
3 - 145