Fip-1.P2 Blank Print (No Print) - Dell 2130cn Service Manual

FIP-1.P2 Blank print (No print)

Before commencing troubleshooting, check the paper transfer path. Make sure there is no foreign
materials on the transfer path, such as staples, paper clips, scraps of paper and so on.
Step
Checking the blank print.
1 Print the contamination check page.
Is the image printed correctly?
Checking the Toner Type
2
Is the Non-Dell Toner seated?
3 Is the image printed correctly?
Checking after reseating all TONER CARTRIDGEs (Y/M/C/
K)
4 Reseat the TONER CARTRIDGEs, and check that their lock
keys are in the lock positions.
Is the image printed correctly?
Trouble substance
The entire paper is printed pure white.
ESS and possible causative parts
- ROS ASSY (PL4.1.1)
- PHD ASSY (PL4.1.21)
- MOTOR ASSY DISP (Y/M/C/K) (PL5.1.3)
or FRAME ASSY MOT (PL5.1.2)
- TONER CARTRIDGE K (PL5.1.21)
- TONER CARTRIDGE C (PL5.1.22)
- TONER CARTRIDGE M (PL5.1.23)
- TONER CARTRIDGE Y (PL5.1.24)
- TRANSFER ASSY (PL6.1.7)
- DRIVE ASSY SUB (PL7.1.1)
- DRIVE ASSY MAIN (PL7.1.2)
- DRIVE ASSY PH (PL7.1.4)
- PWBA ESS (PL8.1.7)
- PWBA MCU (PL8.2.13)
- PWBA HYUI (PL13.4.1)
Check
1 - 322
Chapter 1 Troubleshooting
Remedy
Yes
Printing data form
is not suitable for
the printer, then
check the printing Go to step 2.
data which the
problem
generated.
Replace the toner
with the Dell toner, Go to step 4.
then go to step 3.
Replace the
PWBA ESS.
End of work. (Refer to Removal
42/ Replacement
12.)
End of work. Go to step 5.
No