Dell 2130cn Service Manual page 662

Chapter 3 Removal and Replacement Procedures (RRPs)
2) Mate the flat face of the SHAFT PIVOT
with the hole of the COVER ASSY FRONT,
push the SHAFT PIVOT until the hook is
locked.
Note: Described below is the replacement procedure common among the left and right sides of
the SHAFT LINK FRONT FDRs (PL1.2.26).
3) Mate the flat face of the SHAFT LINK
FRONT FDR with the hole of the COVER
ASSY FRONT, push the SHAFT LINK
FRONT FDR until the hook is locked.
Note: Described below is the replacement procedure common among the left and right SPRING
LINK FRONTs (PL1.2.24).
3 - 211