Fip-1.P12 Skew - Dell 2130cn Service Manual

Hide thumbs Also See for 2130cn:
Table of Contents

Advertisement

FIP-1.P12 Skew

Mnt01116KA
. Tray is recommended for paper feeding because sheets fed via SSF is prone to
skew depending on how the sheet is placed on SSF.
Before commencing troubleshooting, check the paper transfer path. Make sure there is no foreign
materials on the transfer path, such as staples, paper clips, scraps of paper and so on.
Step
Checking the using paper
1
Does the using paper meet the specifications?
2
Is the image printed correctly?
Checking the paper condition
3
Is the paper dry and recommended paper?
4
Is the image printed correctly?
Checking the COVER ASSY FRONT for latching
5
Open and close the COVER ASSY FRONT.
Is the image printed correctly?
6
Is the image printed correctly?
Checking after reseating the PHD ASSY
7
Reseat the PHD ASSY.
Is the image printed correctly?
Checking after reseating the TRANSFER ASSY
8
Reseat the TRANSFER ASSY.
Is the image printed correctly?
Checking the paper feeding tray
9
Is the skewed paper fed from the SSF?
Checking the side guides setting of SSF
10
Reset the side guides.
Is the image printed correctly?
Trouble substance
The printed image is not paralleled with both sides of the paper.
ESS and possible causative parts
- HOLDER ASSY SEPARATOR (PL2.1.5)
- ROLL ASSY FEED (PL3.2.4)
- ROLL ASSY REGI (PL3.2.9)
- ROLL REGI METAL (PL3.2.10)
- FEEDER ASSY DUP (PL11.1.1)
Check
1 - 357
Chapter 1 Troubleshooting
Remedy
Yes
Use the paper that
meets the
Go to step 3.
specifications,
then go to step 2.
End of work.
Go to step 3.
Replace the paper
with a new dry and
Go to step 5.
recommended
one, then go to
step 4.
End of work.
Go to step 5.
Replace the
End of work.
defective parts,
then go to step 6.
End of work.
Go to step 7.
End of work.
Go to step 8.
End of work.
Go to step 9.
Go to step 10.
Go to step 17.
End of work.
Go to step 11.
No

Advertisement

Table of Contents
loading

Table of Contents