Flows 102 Noise During printing
Work before troubleshooting.
Check the sealing tape on the PHD ASSY. if there is the sealing tape, remove it.
Checking the Duplex
Does the noise arise when
feeding the paper from the
Duplex?
Yes
Checking the DUPLEX ASSY for
installation
Reseat the DUPLEX ASSY.
Does the noise arise from the
printer?
Yes
Replace the FEEDER ASSY
DUP.
(Refer to Removal 57/
Replacement 57)
No
Checking the paper feeding
Does the noise arise from the printer
when the paper is fed from the Tray 1 or
Tray 2?
Yes
Checking paper
Check that new dry recommended
paper which matches printer
specifications is being used and replace
as necessary.
Does noise occur during printing when
paper is transferred from Tray 1?
Yes
Replace the SEPARATOR ROLLER
ASSEMBLY.
(Refer to Removal 2/ Replacement 52.)
No
END
1 - 161
Chapter 1 Troubleshooting
No
Check that the position of the
SSF side guides and the paper
insertion is correct and reset as
necessary.
Check that new dry
recommended paper is being
used and replace as necessary.
No
END