Chapter 3 Removal and Replacement Procedures (RRPs)
Replacement 18 BREAKER GFI (PL8.2.11)
1) Engage the three connectors (P/J482,
483, 484) to the BREAKER GFI, attach the
BREAKER GFI to the printer.
Note: Take care not to engage the
connectors to wrong position.
2) Secure the BREAKER GFI to the printer
with the two screws (silver, tap, 12mm).
3) Route the HARN ASSY GFI GND along
the GUIDE HARNESS AC, secure the
grounding terminal of the HARN ASSY GFI
GND with the one screw (silver, with
3 - 182