Flows 43 Paper Jam 072-100 / Paper Jam 072-908
Do not load a sheet to the SSF while printing with the Paper Cassette as the media
Otherwise, a Jam error occurs.
Checking the paper in Tray 2 and the
Insert new paper in Tray 2 and check
that the side and end guides are
adjusted correctly in the CASSETTE
ASSY 250. If incorrect, readjust the side
and end guides.
Does the error occur when printing after
inserting the CASSETTE ASSY 250 into
the printer and opening and closing the
checking the paper feed
Is the paper fed?
Checking the paper feed
Open the Front Cover.
Is the paper fed from the Regi Rollers?
Checking the SENSOR PHOTO (REGI
SENSOR) for operation
Does the number on the screen
increase by one, every time the actuator
of the SENSOR PHOTO (REGI
SENSOR) is operated?
Checked by [Digital Input] - [DI-2] in
[IOT Diagnosis] of diagnosis.
END. If the error occurred again,
replace to known good paper.
Checking the Regi Clutch for operation
Does the Regi Clutch (CLUTCH ASSY
DRIVE) operate properly?
- PC Operation :
- Panel Operation :
During this check, close the COVER ASSY
Replace the Printer.
Checked by the [REGI CLUTCH Operation
Check] of the [Machine Check] of
[Diagnosis] tab in the [Tool Box].
Checked by [Digital Output]-[DO-29] of [IOT
Diag] in [Printer Diag] of diagnosis.
Remove the CASSETTE ASSY 250.
Check that the foreign substances are
not on the paper path.
1 - 82
Chapter 1 Troubleshooting
Replace the KIT