Chapter 3 Removal and Replacement Procedures (RRPs)
Replacement 44 COVER ASSY TOP (PL1.1.1)
1) Mate the hooks of the COVER TOP with
the notch of the COVER REAR.
2) Mate the two holes of the COVER TOP
with the pegs of the printer by pulling down
the COVER TOP.
3) Secure the COVER TOP to the printer
with the two screws (silver, tap, 8mm).
Go to the next replacement step:
Replacement 49 KIT FUSER ASSY (PL6.1.97)
3 - 239