Status Code List - Dell 2130cn Service Manual

2.3 Status Code List

The error messges for the errors which automatically reset themselves will not
appear on the "Status Window".
Error Message
Panel Message
001-360
Restart Printer
Flip
Contact Support
IfMessageReturns
003-340
Restart Printer
Flip
Contact Support
IfMessageReturns
003-356
Restart Printer
Flip
Contact Support
IfMessageReturns
Status Window
Printer error.
Turn off the printer, and turn it
on again.
Contact customer support if
this failure is repeated.
001-360
Printer error.
Turn off the printer, and turn it
on again.
Contact customer support if
this failure is repeated.
003-340-000000XX
Printer error.
Turn off the printer, and turn it
on again.
Contact customer support if
this failure is repeated.
003-356-0000XXXX
Error Contents
<IOT Fan Motor Failure>
Fan Motor failure is detected.
<IOT Firmware Error>
MCU firmware error occurred.
Pressing three keys (< > + < > + < >)
shows detail error code.
Line1 003-340
Line2 Code:XX
01: Unexpected firmware trap
02: Unexpected firmware trap
03: I2C retry error
04: Unexpected firmware trap
05: Unexpected firmware trap
07: Master fail 1
08: Master fail 2
09: NVM illegal data
0A: Over dispense
0B: Unexpected firmware trap
0C: Unexpected firmware trap
0D: Unexpected firmware trap
0E: Unexpected firmware trap
0F: Unexpected firmware trap
10: Unexpected firmware trap
11: Unexpected firmware trap
12: Unexpected firmware trap
13: Unexpected firmware trap
14: Unexpected firmware trap
<IOT NVRAM Error>
The error is detected at MCU NVRAM
check.
Pressing three keys (< > + < > + < >)
shows detail address and data.
Line1 003-356
Line2 Code: XXXX
1000-17FF: PWBA MCU NVM
3000-30FF: PHD CRUM
3100-31FF: Y Toner CRUM
3200-32FF: M Toner CRUM
3300-33FF: C Toner CRUM
3400-34FF: K Toner CRUM
3800-38FF: PWBA EEPROM
1 - 11
Chapter 1 Troubleshooting
FIP to be
referred
Flows 1
FIP-1. 1
Flows 2
FIP-1. 2
Flows 3
FIP-1. 3