Dell 2130cn Service Manual page 433

Clutch and Solenoid name
(Diag. Code)
Regi Clutch (DO-29)
NOTE: When performing operation for five minutes or longer with the
front cover open, remove the PHD ASSY , and cover the drum to
avoid exposure to light.
1) Turn on the power and enter the Diagnostic Mode.
2) Execute the DO-29. Upon hitting the "
noise of the clutch will be heard.
3) Press the "Cancel" key to stop the clutch.
Combination test is as follows.
NOTE: The Regi Roll rotates when the DO-0 and the DO-29 are exe-
cuted. These procedures are for the technical staff.
When performing operation for five minutes or longer with the front
cover open, remove the PHD ASSY, and cover the drum to avoid
exposure to light.
1) Turn on the power and enter the Printer Diag.
2) Open the Front Cover.
3) Cheat the safety Interlock System.
4) Execute the DO-0 and the DO-29.
5) Check the Regi Roll rotation.
6) Press the "Cancel" key to stop the test.
7) Press the " " key to display the DO-0.
8) Press the "Cancel" key to stop the motor.
9) Remove the cheter and close the Front Cover.
2 - 27
Chapter 2 Operation of Diag.
Confirmation procedure
Regi Roll
" key, the operating
Rio02017KA