Chapter 3 Removal and Replacement Procedures (RRPs)
10) Remove the E-ring that fixes the
CLUTCH ASSY DRV to the shaft, using a
miniature screwdriver, remove the
CLUTCH ASSY DRV.
11) Rotate the STOPPER PIVOT
(PL6.1.3), mate the tabs of the STOPPER
PIVOT with the notches of the DRIVE
ASSY MAIN (PL7.1.2).
12) Remove the STOPPER PIVOT from
the printer.
Note: When carrying out the work described next procedure, take care not to drop the GEAR T4.
3 - 38