Fip-1. 14 010-317 Restart Printer - Dell 2130cn Service Manual

Hide thumbs Also See for 2130cn:
Table of Contents

Advertisement

FIP-1. 14 010-317 Restart Printer

Step
Possible causative parts:
FUSER ASSY (PL6.1.1)
HARN ASSY FUSER2 (PL6.1.2)
PWBA MCU (PL8.2.13)
Checking after reseating the FUSER ASSY
Reseat the FUSER ASSY.
Warning: Start the operation after the FUSER ASSY has
1
cooled down.
Does the error still occur when the power is turned OFF and
ON?
Checking the connectors for connection
Remove the FUSER ASSY.
Warning: Start the operation after the FUSER ASSY has
cooled down.
Check the connections between the PWBA MCU and
FUSER ASSY.
Are P/J17 and P/J171 connected correctly?
2
Does the error still occur when the power is turned OFF and
3
ON?
Checking the HARN ASSY FUSER2 for continuity
Remove the FUSER ASSY.
Warning: Start the operation after the FUSER ASSY has
4
cooled down.
Disconnect J17 from the PWBA MCU.
Is each cable of J17 <=> P171 continuous?
NOTE: P171 is attached to the frame.
Check
1 - 192
Chapter 1 Troubleshooting
Remedy
Yes
Go to step 2.
End of work.
Reconnect the
connector(s) P/
Go to step 4.
J17 and/or P/J171
correctly, then go
to step 3.
Go to step 4.
End of work.
Replace the
Go to step 5.
HARN ASSY
FUSER2.
No

Advertisement

Table of Contents
loading

Table of Contents