Dell 2130cn Service Manual page 485

Hide thumbs Also See for 2130cn:

Table of Contents

Chapter 3 Removal and Replacement Procedures (RRPs)

Removal 18 HARN ASSY INTERLOCK (PL8.2.5)

1) Remove the Tray 1. (Removal 1)

2) Open the COVER ASSY FRONT (PL1.2.1).

Note: Cover the drum of the PHD unit to avoid exposure to light.

3) Remove the PHD Unit. (Removal 4)

Note: The FUSER part is very hot. Take added care not to get burned when performing the

service operation.

4) Remove the KIT FUSER ASSY. (Removal 5)

5) Remove the COVER ASSY TOP. (Removal 10)

6) Remove the COVER SIDE L. (Removal 17)

7) Disengage the connector (P/J44) of the

HARN ASSY INTERLOCK (PL8.2.5) on

the PWBA LVPS (PL8.2.1), release the

harness of the HARN ASSY INTERLOCK

from the GUIDE HARNESS FSR

8) Release the clamps that fix the harness

of the HARN ASSY INTERLOCK, remove

the harness.

Chapters

Table of Contents