Chapter 3 Removal and Replacement Procedures (RRPs)
Replacement 31 ACTUATOR SSI (PL3.2.14)
1) Attach the SPRING ACT SSI to the
ACTUATOR SSI.
Note: When carrying out the work
described next procedure, ensure that
SPRING ACT SSI
the SPRING ACT SSI is hung to
ACTUATOR SSI and the CHUTE UP
correctly.
2) Insert the right shaft of the ACTUATOR
SSI into the hole of the CHUTE UP, hang
the SPRING ACT SSI to the CUHTE UP.
3 - 216