Fip-Ac - Dell 2130cn Service Manual

FIP-AC

Step
Checking the printer
1 Does the motor noise arise when turning on the power?
During this test, close the COVER ASSY FRONT.
Checking the power supply on wall outlet
2 Connect the power cord with other wall outlet.
Does the printer operate normally?
Checking the power code for connection
3 Reconnect the power cord.
Does the printer operate normally?
Checking the BREAKER GFI for operation
4
Does the BREAKER GFI operate normally?
Checking the connector of PWBA LVPS for connection
Disconnect the power cord and wait for one minute.
5
Reconnect the all connectors of PWBA LVPS.
Does the printer operate normally?
Checking the connector of MAIN SWITCH for connection
Disconnect the power cord and wait for one minute.
6
Reconnect the connector of MAIN SWITCH.
Does the printer operate normally?
Check
1 - 375
Chapter 1 Troubleshooting
Remedy
Yes
Go to FIP-DC. Go to step 2.
End of work. Go to step 3.
End of work. Go to step 4.
End of work. Go to step 5.
End of work. Go to step 6.
Replace the
PWBA LVPS.
End of work. (Refer to Removal
11/ Replacement
43.)
No