Fip-1.P10 Afterimage (Ghost) - Dell 2130cn Service Manual

FIP-1.P10 Afterimage (Ghost)

Before commencing troubleshooting, check the paper transfer path. Make sure there is no foreign
materials on the transfer path, such as staples, paper clips, scraps of paper and so on.
Step
Checking the printing
1
Did the client print the same image of large volume?
Checking the Afterimage(Ghost).
2 Print the Windows test page.
Is the image printed correctly?
Checking the Afterimage(Ghost).
Print the [Ghost Configuration Chart] in [Chart Print] in
3
[Diagnosis] tab of [CE Diag].
Is the image printed correctly?
Checking the erase lamps
Open the COVER ASSY FRONT, and remove the PHD
4 ASSY.
Cheat the safty interlock switch.
Does the four erase LEDs light correctly?
Checking the connectors for connection
Check the connections between the PWBA MCU and LED
ASSY ERASE.
Are P/J141 and P/J14 connected correctly?
5
Afterimage
Wsb02020KA
Check
Trouble substance
The ghost appears on the paper. The
ghost may be the image of the
previous page, or a part of the page
currently printing.
ESS and possible causative parts
- LED ASSY ERASE (PL4.1.8)
- PHD ASSY (PL4.1.21)
- FUSER ASSY (PL6.1.1)
- TRANSFER ASSY (PL6.1.7)
- PWBA ESS (PL8.1.7)
Mnt01114KA
- PWBA MCU (PL8.2.13)
- HARN ASSY LVPS (PL9.1.3)
Go to step 2.
Check the printing
data which the
problem
generated.
End of work.
Go to step 8.
Go to step 6.
1 - 350
Chapter 1 Troubleshooting
Remedy
Yes No
Go to step 3.
Go to step 3.
Go to step 4.
Go to step 5.
Reconnect the
connector(s) P/
J141 and/or P/J14
surely, then go to
step 6.