Chapter 3 Removal and Replacement Procedures (RRPs)
17) Remove the two screws (silver, 6mm)
that fix the BRACKET MCU R (PL8.2.15)
to the printer.
18) Remove the BRACKET MCU R from
the printer.
19) Release the harness of the HARN
ASSY FUSER2 (PL6.1.2) and the harness
of the HARN ASSY INTERLOCK (PL8.2.5)
from the GUIDE HARNESS FSR
(PL8.2.2).
3 - 107