Dell 2130cn Service Manual page 384

Hide thumbs Also See for 2130cn:
Table of Contents

Advertisement

Step
Checking the paper path
11
Are there any foreign substances on the paper path?
12
Is the image printed correctly?
Checking the ROLL ASSY REGI and ROLL ASSY METAL
for rotation
Enter the [Digital Output] - [DO-0] in [CE Diag] tab, and then
enter the [Digital Output] - [DO-27] in [CE Diag] tab of [CE
13
Diag].
Does the Roll Assy Regi and Roll Regi Metal rotate?
During this check, cheat the interlock switch (HARN ASSY
INTERLOCK).
Checking the skewed mode
14
Is the skewed paper fed from the Duplex?
Checking the FEEDER ASSY DUP for installation
15
Reseat the FEEDER ASSY DUP.
Does the error still occur when printing?
Checking the paper path
16
Are there any foreign substances on the paper path?
Checking after reseating the Paper Cassette
17
Reseat the Paper Cassette.
Is the image printed correctly?
Checking after reseating the paper
18
Reseat the paper in the Paper Cassette.
Is the image printed correctly?
Checking the side guides of the Paper Cassette
19
Reset the side guides.
Is the image printed correctly?
Checking the paper path
20
Are there any foreign substances on the paper path?
21
Is the image printed correctly?
Checking after reseating the HOLDER ASSY SEPARATOR
22
Reseat the HOLDER ASSY SEPARATOR.
Is the image printed correctly?
Checking after replacing the HOLDER ASSY SEPARATOR
Replace the HOLDER ASSY SEPARATOR. (Refer to
23
Removal 2/Replacement 52.)
Is the image printed correctly?
Checking after replacing the ROLL ASSY FEED
Replace the ROLLER ASSY FEED. (Refer to Removal 9/
24
Replacement 45.)
Is the image printed correctly?
Check
1 - 358
Chapter 1 Troubleshooting
Remedy
Yes
Remove the
foreign
Go to step 13.
substances, then
go to step 12.
End of work.
Go to step 13.
Replace the ROLL
ASSY REGI and/
End of work.
or ROLL REGI
METAL.
Go to step 15.
Go to step 17.
Go to step 16.
End of work
Replace the
Remove the
FEEDER ASSY
foreign
DUP. (Refer to
substances.
Removal 57/
Replacement 57.)
End of work.
Go to step 18.
End of work.
Go to step 19.
End of work.
Go to step 20.
Remove the
foreign
Go to step 22.
substances, then
go to step 21.
End of work.
Go to step 22.
End of work.
Go to step 23.
End of work.
Go to step 24.
End of work.
Go to step 25.
No

Advertisement

Table of Contents
loading

Table of Contents