Dell 2130cn Service Manual page 481

Hide thumbs Also See for 2130cn:

Table of Contents

Removal 16 KIT BLOCK PHD RIGHT (PL4.1.97)

1) Remove the Tray 1. (Removal 1)

2) Open the COVER ASSY FRONT (PL1.2.1).

Note: Cover the drum of the PHD unit to avoid exposure to light.

3) Remove the PHD Unit. (Removal 4)

Note: The FUSER part is very hot. Take added care not to get burned when performing the

service operation.

4) Remove the KIT FUSER ASSY. (Removal 5)

5) Remove the COVER ASSY TOP. (Removal 10)

6) Remove the COVER ASSY WINDOW TNR. (Removal 8)

7) Remove the COVER SIDE R. (Removal 13)

8) Remove the LED ASSY ERASE. (Removal 15)

Accesses Position (The 9), 10), 11) and 12) show the procedure number.)

Note: Described below is the removal procedure common among the upper and lower BLOCK

STOPPER PHD ADs (PL4.1.7).

9) Release the hook of the BLOCK

STOPPER PHD AD (PL4.1.7), using a

miniature screwdriver.

Chapter 3 Removal and Replacement Procedures (RRPs)

Chapters

Table of Contents