Fip-1. 6 006-370 Restart Printer - Dell 2130cn Service Manual

Hide thumbs Also See for 2130cn:
Table of Contents

Advertisement

FIP-1. 6 006-370 Restart Printer

Step
Possible causative parts:
ROS ASSY (PL4.1.1)
HARN ASSY ROS RE (PL4.1.22)
HARN ASSY ROS VIDEO (PL4.1.23)
PWBA MCU (PL8.2.13)
Does the error still occur when the power is turned OFF and
1
ON?
Checking after reseating the PWBA MCU
Reseat the PWBA MCU.
2
Does the error still occur when the power is turned OFF and
ON?
Checking after reseating the ROS ASSY
Reseat the ROS ASSY.
3
Does the error still occur when the power is turned OFF and
ON?
Check the connections between the ROS ASSY and PWBA
MCU.
Are P/J40, P/J41, P/J411 and P/J412 connected correctly?
4
Does the error still occur when the power is turned OFF and
5
ON?
Checking the HARN ASSY ROS RE for continuity
Disconnect P/J40 from the PWBA MCU.
6
Disconnect P/J411 from the ROS ASSY.
Is each cable of J40 <=> J411 continuous?
Checking the HARN ASSY ROS VIDEO for continuity
Disconnect J41 from the PWBA MCU.
7
Disconnect J412 from the ROS ASSY.
Is each cable of J41 <=> J412 continuous?
Checking after replacing the ROS ASSY
Replace the ROS ASSY. (Refer to Removal 45/
8
Replacement 9.)
Does the error still occur when the power is turned OFF and
ON?
Check
1 - 175
Chapter 1 Troubleshooting
Remedy
Yes
Go to step 2.
End of work.
Go to step 3.
End of work.
Go to step 4.
End of work.
Reconnect the
connector(s) P/
J40, P/J41, P/J411
Go to step 6.
and/or P/J412
correctly, then go
to step 5.
Go to step 6.
End of work.
Replace the
Go to step 7.
HARN ASSY ROS
RE.
Replace the
Go to step 8.
HARN ASSY ROS
VIDEO.
Replace the
PWBA MCU.
(Refer to Removal
End of work.
43/ Replacement
11.)
No

Advertisement

Table of Contents
loading

Table of Contents