Troubleshooting For The Repair Center; Fip-1. 1 001-360 Restart Printer - Dell 2130cn Service Manual

3.2

Troubleshooting for the repair center

FIP-1. 1 001-360 Restart Printer

Step
Possible causative parts:
FAN (PL8.1.1)
PWBA LVPS (PL8.2.1)
PWBA MCU (PL8.2.13)
PWBA FAN (PL8.2.20)
HARN ASSY LVPS2 (PL9.1.3)
HARN ASSY MCU HAN (PL9.1.13)
Does the error still occur when the power is turned OFF and
1
ON?
Checking the FAN for rotation
Does the FAN function normally?
2 Checked by [Digital Output] - [DO-1E or DO-1F] in [IOT
Diag] of diagnosis.
During this check, close the COVER ASSY FRONT.
Check the connection between the FAN and PWBA .
Is P/J510 on PWBA FAN connected correctly?
3
Does the error still occur when the power is turned OFF and
4
ON?
Check the connection between the PWBA FAN and the
PWBA LVPS
5
Is P/J 520 on the PWBA FAN and P/J503 on the PWBA
LVPS connected correctly?
Does the error still occur when the power is turned OFF and
6
ON?
Check the connection between the PWBA FAN and the
PWBA MCU
7
Is P/J 530 on the PWBA FAN and P/J30 on the PWBA MCU
connected correctly?
Does the error still occur when the power is turned OFF and
8
ON?
Check
1 - 168
Chapter 1 Troubleshooting
Remedy
Yes
Go to step 2. End of work.
Replace the
PWBA MCU.
(Refer to Removal Go to step 3.
43 / Replacement
11.)
Reconnect the
connector P/J510
Go to step 5.
correctly, then go
to step 4.
Go to step 5. End of work.
Reconnect the
connector P/J 520
Go to step 7. and P/J 503
correctly, then go
to step 6.
Go to step 7. End of work.
Reconnect the
connector P/J 530
Go to step 9. and P/J 30
correctly, then go
to step 8.
Go to step 9. End of work.
No