Checking the Duplex Motor for
Does the Duplex Motor operate
Checked by [Digital Output] - [DO-12] in
[IOT Diag] of diagnosis.
During this check, close the COVER
Checking installation of the FUSER
Reseat the FUSER ASSY.
Warning: Do work only after the FUSER
unit has cooled to room temperature.
Does the error still occur after turning
the power off and on?
Checking the SENSOR PHOTO (REGI
SENSOR) for operation
Does the number on the screen
increase by one, every time the actuator
of the SENSOR PHOTO (REGI
SENSOR) is operated?
Checked by [Digital Input] - [DI-2] in
[IOT Diagnosis] of diagnosis.
Replace the FEEDER ASSY DUP
Replace the Printer.
1 - 96
Chapter 1 Troubleshooting