Dell 2130cn Service Manual page 339

Hide thumbs Also See for 2130cn:
Table of Contents

Advertisement

4) Toner spots appear on the page/printing is blurred:
a)Check the toner cartridge to make sure it is installed correctly.
b)Change the toner cartridge.
5) Entire page is white:
a)Make sure the packaging material is removed from the toner cartridge.
b)Check the toner cartridge to make sure it is installed correctly.
c)The toner may be low. Change the toner cartridge.
6) Streaks appear on the page:
a)The toner may be low. Change the toner cartridge.
b)If you are using preprinted forms, make sure the toner can withstand temperatures of 0°C to
35°C.
7) Characters have jagged or uneven edges:
a) If you are using downloaded fonts, verify that the fonts are supported by the printer, the host
computer, and the software program.
8) Part or all of the page prints in black:
a) Check the toner cartridge to make sure it is installed correctly.
9) The job prints, but the top and side margins are incorrect:
a) Make sure the Paper Size setting in the Tray Settings is correct.
b) Make sure the margins are set correctly in your software program.
1 - 313
Chapter 1 Troubleshooting

Advertisement

Table of Contents
loading

Table of Contents